Custom Metal Stamps: Personalized Logo & Jewelry Punches

Our custom metal stamps are designed for applying logos to flat metal surfaces, as well as thick genuine leather. With this custom jewelry stamp, you can recreate a design on your handmade products to make them unique. The punch stamps can also be used for silver marking and as a knife maker9;s mark for blades9; stamping.

HOW TO ORDER:
You should send a high-resolution black and white logo in JPEG, PNG or a VECTOR file in PDF format via messages after purchasing.

Black areas of your logo will be raised on a stamp.

A logo can be small enough (from 2 mm) but lines of that logo must not be less than 0.2 millimeter in thickness, the least diameter of a steel rod is 8 mm (for comfortable work by a hammer).

ONE INCH = 25.4 mm

HOW TO USE:
You should place your blanks to a solid flat surface (an anvil, e.g.)

Then put the stamp perpendicular to the blank and make a strong, accurate blow with a heavy hammer.

If you don9;t have enough power to make it, ask someone else to do it or use a press.

Notice if there are large black areas of your logo or the lines of the logo larger than 0.4 millimeter in thickness, it might be difficult to make an impression in solid metals. A blow should be strong and accurate, and a blank to be branded should be placed on an anvil or similar strong surface.

SPECIFICATIONS:
A length of stamps9; steel rod: from 60 mm to 120 mm (it depends on the size of a logo).

The stamps9; steel is hardened (hardness is 54-58 HRC).

Our steel rods have a special cross-hatching for comfortable holding when stamping.

That is a high-quality product made in Europe (stamps have high-resolution, high-quality and precision of lines).